How to adjust bass volume:
Bass adjusting:
Press TV button for 3s and then press ( - ) to enter bass volumesettings.
MultiBeam Calibration:
Virtual Atmos:
Connecting to Bluetooth:
Specification:
Bluetooth® version 4.2
Total speaker power output 250 WSoundbar output power (Max. @THD 1%) 5 x 50 W
Audio synchronization:
Audio sync
With the audio sync function, you can synchronize audio and video to make sure that no delay is heard from your video content.
1. On the remote control, press and hold for more than three seconds.
2. Within five seconds, press + or - on the remote control to adjust the audio delay and match with video.
→ The audio sync timing is displayed.
Smart mode
With the smart mode enabled by default, you can enjoy TV programs with rich sound effects. For TV programs such as news and weather forecasts, you can reduce sound effects by disabling the smart mode and switching to the standard mode.
Smart mode: EQ settings and JBL Surround Sound are applied for rich sound effects.
Standard mode: The preset EQ settings are applied for standard
sound effects.
On the remote control, press and (disable volume) hold for more than three seconds. Press +.
RESTORE FACTORY SETTINGS
By restoring the default settings defined at factories. you remove all your personalized settings from the soundbar.
On the soundbar, press and hold (power-off) button for more then 10s. Reset will be displayed.
Links:
https://eu.jbl.com/JBLBAR50MBBLKEP.html
Bar 5.0 MultiBeam Review
